KITECH


Applicable materials



Option A. Hydraulic Type Squeezing Dryer


KHS series hydraulic squeezing dryer is applied for drying LDPE industry film/bag and PP woven bags, normally it’s installed at the end of washing lines, inside the squeezer, there is a special designed screw which compress the material continually.
During pressing, there is strong friction between the material and the machine, and generates friction heating, which helpful for drying.
At the outlet of the machine, there is a hydraulic valve. At the beginning it is closed, and the more material compressed, the higher pressure the valve bear. When hydraulic pressure reached the set point. Then the valve opens for discharging the material.


Key Features


-Strong screw pressing dewatering design to achieve efficient dewatering.
-Compared with traditional centrifugal dryer, energy saving up to 70%.
-Automatic intelligent control system to achieve accurate control, final moisture content is more uniform.
-Final moisture under 5-8%, it can work together with thermal drying system, moisture can be controlled at 3-5%.
-Easy to operation and Low maintenance.


Final Material



Table features


Machine Model KHS350 KHS400 KHS450
Motor Power 55kW 75kW 110kW
Screw Material 40CR 40CR 40CR
Cutting Blade 4pcs,DC53 4pcs,DC53 4pcs,DC53
Screw Diameter 320mm 450mm 550mm
Capacity/Hour 250-350kg/h 400-600kg/h 700-1000kg/h
Length in mm 3079 3445 3811
Height in mm 2369 2657 2945
Width in mm 1720 2020 2320


Option B. Semi-plasticized Type Squeezing Dryer



Working Principle


Kitech JGM series Plasticizing type squeezing dryer is used for the dehydration of LDPE stretch film/agricultural film/PP woven bag and some other thin soft waste plastic, it’s equipped with the special high quality screw. Which can dewatering and drying the washed material by the strong press and squeezing power. Materials enter the barrel and screw through the hopper.
And the screw squeezes the material with high strength. After pressing, the material is pushed into the die surface cutter and finally cut into semi-plasticized particles, after being squeezed, semi-plasticized particles with much lower moisture and higher density can be faster, easier and more stable fed into pelletizing machine. Which can improve the efficiency of pelletizing machine.
Specially designed high torque gear box and self-developed thrust bearing seat, bring strong screw thrust, the drying effect is better. JGM series Plasticizing type squeezing dryer with the screw squeezing and electrical heating can effectively control the final humidity of the material at 3-5%, the capacity range is 200-1000kg/h. It can be used alone or connected with the washing production line, the operation is simple.


Key Features


-Reduce moisture level to 3-5%, increase pelletizing efficiency, improve pellets quality.
-More stable operation and long equipment life.
-Low noise and less space required.
-Cut frequency control, uniform and stable.
-PLC automatic control, simple operation and more convenient maintenance.
-Semi-plasticized particles can be used for pelletizing or sold directly.
-One machine realizes the functions of three machines (centrifugal dryer, hot air dryer Agglomerator), which is more efficiency and economical and energy saving.


Final Material



Technical Data


Machine Model JGM300 JGM320 JGM350 JGM380
Motor Power 110kW 132kW 185kW 200kW
Cutting Power 4KW 4KW 5.5KW 5.5KW
Screw&barrel Material 38CrMoAl 38CrMoAl 38CrMoAl 38CrMoAl
Screw Diameter 320mm 320mm 350mm 380mm
Capacity/Hour 200-300kg/h 300-500kg/h 500-800kg/h 700-1000kg/h
Length in mm 2516 3070 3624 4178
Height in mm 2205 2257 2309 2361
Width in mm 2240 2320 2400 2480