Single Shaft Plastic Shredder
Programmable
Control
Modular
Combination
lnstallation
Multiple
Materials
Process
Applicable materials
General Description
The AGS General Purpose Single Shaft Shredder has a 457mm diameter profiled rotor made of 74rpm . The concave ground, aggressive 4-way rotating knives are mounted in the grooves of the profiled rotor with special knife holders. This enables a reduction of the cutting gap between the counter knives and the rotor which guarantees a high flow rate ,low power consumption and maximum output of shredded material.
The hydraulically operated ram feeds the material automatically in the rotor’s cutting chamber by load-related controls. The hydraulic system is equipped with high-pressure valves and volumetric flow controls which can be set according to the requirements of the input material.
Extremely robust pedestal bearing housings are mounted outside the machine and separate to the cutting chamber to prevent dust dirt penetrating into the oversized bearing. This ensures a long service life and minimum service and maintenance.
Power is transmitted from the motor by a drive belt via an oversized gearbox which is located on the shaft end on one end of the rotor.
A safety switch prevents machine startup when the front panel is open and the machine features emergency stop buttons on the machine body and control panel.
Unit Introduction
Rotor
Large diameter flat rotor Machined pocket knife holders Optional hard facing
Gear box
50000 hours long stable running Vertical compact structure Long time operation without oil leakage
Horzontal pusher design
Robust ram construction Powerful hydraulic swing type ram Reduced footprint
Touch screen
PLC automatic control
Rotor Knives and Stator Knives
1-1.5mm gap Hard D2 material Concave ground square knives
Bearing
Famous brand from japan high strength and toughness
Floor Plan
Technical Data
|
ITEM |
UNIT |
AGS850 |
AGS1200 |
AGS1500 |
AGS2000 |
|
|
Cutting Chamber |
mm |
840x1570 |
1120x1570 |
1400x1570 |
1960x1570 |
|
|
Rotor Diameter |
mm |
457 |
457 |
457 |
457 |
|
|
Rotor Speed |
rpm |
74 |
74 |
74 |
74 |
|
|
Main Motor Power |
kw |
37/45/55 |
55 |
75 |
74 |
|
|
Rotor Knives |
pcs |
60 |
81 |
102 |
144 |
|
|
Stator Knives |
pcs |
2x3 |
2x4 |
2x5 |
2x7 |
|
|
Hydraulic Ram Power |
kw |
3.75 |
5.6 |
5.6 |
5.6 |
|
|
Screen Size |
mm |
40~100 |
40~100 |
40~100 |
40~100 |
|
|
Screen Working Area |
mm |
800x730 |
800x1000 |
800x1290 |
800x1860 |
|
|
Dimensions |
A |
mm |
2300 |
2300 |
2300 |
2300 |
|
B |
mm |
1650 |
1650 |
1650 |
1650 |
|
|
C |
mm |
540 |
540 |
540 |
540 |
|
|
D |
mm |
660 |
660 |
660 |
660 |
|
|
E |
mm |
2250 |
2250 |
2250 |
2250 |
|
|
F |
mm |
350 |
350 |
350 |
350 |
|
|
G |
mm |
2000 |
2280 |
2600 |
3720 |
|
| Standard | Alternative |